Skip to content

Your cart

Your cart is empty

Continue shopping

Article: Infrared Lamps Compared: Beurer, TDP, Asante and Resty (2026)

Resty 550W double-head infrared heat lamp with both heads lit, on a height-adjustable stand with a four-wheel cross base

Infrared Lamps Compared: Beurer, TDP, Asante and Resty (2026)

On a cold, damp Hong Kong evening, "infrared lamp" can mean three quite different things: a small lamp on the table with a glowing bulb or halogen tube behind a red or clear glass front, a TDP lamp with a warm plate on a floor stand, or a heat lamp on a tall stand with one or two heads on bendable arms. From across the room they look alike. Inside, they work differently, they give off different kinds of infrared and they fit different corners of a flat.

This guide sets seven lamps that you can buy in Hong Kong side by side: the Beurer IL 50, the Asante SN-52A and the Tailor Made TM200 on the table, and on the floor the BODYCARE IR-2014, a TDP lamp sold as the CQ-29 and our own 275W single-head lamp and 550W double-head lamp. For each you will find the kind of lamp, its power, its stand, its timer and what its maker says about distance and time, plus what a session adds to your electricity bill and what the Consumer Council found when it looked at eight home lamps.

Three kinds of infrared lamp and what each gives off, ending with the Resty 550W beside a sofa. The film has no sound.

The short version

  • Tabletop lamps such as the Beurer IL 50, the Asante SN-52A and the Tailor Made TM200 put one 200 to 300 W heat source behind a front glass on a small housing. They store easily but need a table or shelf at the right height beside you.
  • Floor-stand lamps such as the BODYCARE IR-2014 and the Resty 275W and 550W stand beside a chair or sofa, with a head that you tilt or turn towards the area you want to warm. The Resty lamps also roll on four wheels and have bendable gooseneck arms.
  • TDP lamps have no bulb: an element heats a coated plate, which needs several minutes to warm up and gives off long-wave infrared with hardly any glow.
  • Running cost is small for all of them. At autumn 2026 prices a 15-minute session costs between about 8 and 21 cents, depending on the lamp and on whether you buy power from CLP or HK Electric.
  • Check the manual or the listing before you compare features: the distance, the session time and whether the lamp switches itself off differ more between models than the power does.

Three kinds of infrared lamp

Tabletop lamps with a halogen tube or a heat bulb

Seven of the eight home lamps the Consumer Council looked at in 2023 were of this kind: a compact housing that stands on a table and tilts [1]. Inside is either a halogen tube behind a ceramic glass plate, as in the Beurer IL 50, the Asante SN-52A and the Tailor Made TM200, or an infrared reflector bulb, as in Beurer's smaller IL 11, IL 21 and IL 35 [3][5][20][9]. Beurer gives a dominant wavelength of 1,250 nm for the halogen lamp of the IL 50 and 1,100 nm for the bulb of the IL 35, both in the short-wave infrared just beyond visible red [3][4]. A lamp like this is light (about 1.5 to 1.6 kg for the three halogen models) and easy to put away, but it has to sit on something beside you, at about the height of the area you want to warm.

Floor-stand heat lamps

A floor-stand lamp puts the heat source on a pole with a base, so it stands beside the chair or sofa you use instead of on a table. The BODYCARE IR-2014 has one 240 W bulb behind a safety net, a height of about 109 to 160 cm, a head that tilts and a timer of up to 60 minutes; the Consumer Council also lists a setting for infrared intensity [6][1]. The Resty 275W has one 275 W red heat bulb in a metal shade on a gooseneck arm, and the Resty 550W two of them, each with its own arm, timer and temperature setting; both adjust between about 70 and 160 cm and roll on four wheels [2].

TDP lamps (神燈)

A TDP lamp, which Hong Kong sellers also list as 神燈, has no bulb [7]. An element heats a round plate, which TDP sellers describe as coated with a mix of minerals [21], and the warm plate gives off infrared. The CQ model numbers match the range of a TDP maker whose website states wavelengths of 2 to 25 micrometres, mostly in the long-wave infrared (IR-C). Its 2005 filing in the United States for the CQ-27 and CQ-36 (110 V versions) gives 5 to 25 micrometres, a warm-up time of 15 minutes, a distance of 8 to 12 inches (about 20 to 30 cm) and a plate to be replaced after 1,000 hours of use [7][8]. Because its output lies mostly beyond 2 micrometres, the plate must run far cooler than a bulb filament, so it barely glows.

Where each kind of lamp gives off most

Visible light ends at about 780 nm. The CIE divides the infrared beyond it into IR-A, IR-B and IR-C [17].

VisibleIR-AIR-BIR-C
Heat bulb or halogen tube
TDP plate
A sketch, not a measurement. Heat bulb and halogen tube: Beurer states a dominant wavelength of 1,100 to 1,250 nm and a range of 780 to 3,000 nm for its lamps; a 250 W red infrared bulb described by a lamp-history reference site runs its filament at about 2,450 K and peaks at about 1,150 nm. TDP plate: a TDP maker states 2 to 25 µm. Band limits: IR-A 780 nm to 1.4 µm, IR-B 1.4 to 3 µm, IR-C 3 µm to 1 mm.

Why the difference? Every warm surface gives off infrared, and the hotter it is, the shorter the wavelength at which its output peaks: Wien's displacement law puts the peak at about 2,898 micrometres divided by the temperature in kelvin [10]. A heat-bulb filament at around 2,450 K therefore peaks at about 1.2 micrometres (a lamp-history reference site gives about 1,150 nm for one 250 W red bulb) and also gives off some visible red light [11]. ICNIRP, the international commission on non-ionising radiation protection, describes heated ceramic and metal plates at 300 to 400°C as giving off mainly IR-C and no visible light, and filament lamps as giving off a little visible light that makes them easy to tell apart [18]. Either way you feel the infrared as warmth on the area that faces the lamp.

How we compared

We chose the infrared lamps a Hong Kong shopper is most likely to meet: lamps listed by Hong Kong retailers on 28 October 2026 (YOHO, Medimart, HKTVmall and a medical supplier in Fanling), among them three of the models the Consumer Council looked at in 2023 (the Beurer IL 50, the Tailor Made TM200 and the floor-standing IR-2014) and the Asante model now in the shops, plus one TDP lamp. For each we used the maker's product page or manual first, then the Hong Kong listing, and the Consumer Council's 2023 table where both are silent. "Not stated" means we found no statement. Prices change often, so they are not in the tables.

Side by side: kind, power and stand

Seven infrared lamps sold in Hong Kong. Power is the electricity a lamp draws, not the infrared that reaches you, so the watts do not rank the lamps.
Lamp Kind Power Form Adjustment
Beurer IL 50 [3] Halogen tube behind a ceramic glass plate 300 W Tabletop, about 1.6 kg Tilts 0 to 50°
Asante SN-52A [5] Halogen tube behind a ceramic glass front 300 W Compact housing with a handle, about 1.5 kg Tilts 15° up, 35° down
Tailor Made TM200 [20][1] Halogen tube behind a filter plate 200 W Tabletop, about 1.5 kg Tilts 0 to 35°
BODYCARE IR-2014 [6][1] Heat bulb behind a safety net 240 W Floor stand Height about 109 to 160 cm; head tilts (0 to 315° in the Consumer Council table); infrared intensity setting
TDP lamp CQ-29 [7] Plate heated by an element (coating not stated by the seller) 250 W Floor stand on wheels Head on a swing arm
Resty 275W (our product) [2] Red heat bulb in a metal shade 275 W Floor stand on four wheels, 4.8 kg Height about 70 to 160 cm; gooseneck arm; head turns 360°
Resty 550W (our product) [2] Two red heat bulbs in metal shades 550 W (2 × 275 W) Floor stand on four wheels, 6.7 kg Height about 70 to 160 cm; two gooseneck arms

How tall each lamp stands

Heights drawn to one scale; the widths are not to scale. Floor lamps are drawn at their highest setting.

  • Beurer IL 50

    28.5 cm

  • Asante SN-52A

    20 cm

  • Tailor Made TM200

    29 cm

  • BODYCARE IR-2014

    about 109 to 160 cm

  • Resty 275W and 550W

    about 70 to 160 cm

Heights as stated by each maker or seller: Beurer IL 50 28.5 cm, Asante SN-52A 20 cm, Tailor Made TM200 29 cm, BODYCARE IR-2014 43 to 63 inches (about 109 to 160 cm; the Consumer Council table gives 170 cm), Resty about 70 to 160 cm. The CQ-29 seller gives no height, so it is not drawn.

Timer, distance and session time, as stated

The Consumer Council checked these details on the boxes and manuals of eight lamps in 2023: one gave no distance and three had no timer. A timer that switches the lamp off ends a session you might otherwise forget; it is no reason to doze under a lamp.

What the makers and sellers say about use
Lamp Timer Switches itself off Distance given Session given
Beurer IL 50 [3] 1 to 15 minutes Yes, at the end of the timer; thermal fuse against overheating No figure in the current manual: a distance where the warmth feels pleasant At most 15 minutes at a time
Asante SN-52A [5] 5, 10 or 15 minutes Yes, at the end of the timer and on overheating At least 40 cm Up to 15 minutes (timer)
Tailor Made TM200 [20][1] None in the Consumer Council table (2023) Not stated About 30 cm 15 minutes per area
BODYCARE IR-2014 [6][1] 1 to 60 minutes Not stated None in the manual the Consumer Council saw in 2023; its agent told the Council 30 cm Up to 60 minutes in that manual; its agent told the Council 15 minutes
TDP lamp CQ-29 [7][8] 0 to 60 minutes, mechanical Not stated Not stated by the seller; 8 to 12 inches (about 20 to 30 cm) in a 2005 US filing for the CQ-27 and CQ-36 Not stated by the seller
Resty 275W and 550W (our products) [2] Built in (one per head on the 550W); range not stated Not stated on our product pages About 40 cm Start with 10 to 15 minutes

What the Consumer Council found in eight home lamps

In its CHOICE magazine of February 2023 (issue 556), the Consumer Council reviewed the packaging and manuals of eight home infrared lamps from four brands [1]. Four used infrared bulbs of 100 to 240 W and four used infrared halogen tubes of 200 to 300 W; seven were tabletop lamps and one stood on the floor with an adjustable height. Four of the eight were Beurer lamps. The Council did not test how well the lamps warm; it checked what buyers are told on the box and in the manual.

  • Area. Four models were said to light an area of 30 × 40 cm, one of them only by its agent; the other four gave no figure.
  • Distance. Seven stated the nearest distance, from 30 cm to 80 cm. The manual of the floor-standing model gave none; its agent told the Council 30 cm, and the Council asked for the manual to be corrected.
  • Time. All eight stated a session time: 12 to 15 minutes for seven of them, and up to 60 minutes in the manual of the floor lamp, for which its agent gave the Council 15 minutes.
  • Timer. Five of the eight had a timer; the Council's table lists automatic switch-off for two of them, both Beurer lamps.
  • Angle. All eight could be tilted, three of them in five steps and the others without steps.
  • Warranty. For seven of the eight, the warranty did not cover the bulb or the halogen tube.

The Council's advice includes reading the manual first and keeping to its distance and session time [1]. It also names people who should take extra care or avoid these lamps; our guide to low-temperature burns sets out that advice and the temperatures involved.

Since 2023 some of the eight have changed. The Asante lamp in the shops we checked is now the SN-52A (the Council saw the SN-51) [5]; the IR-2014, which the Council listed under the brand Yeollin Sesang, is still sold on HKTVmall as a BODYCARE lamp [6]; and the YOHO and HKTVmall listings we could read for Beurer's three bulb lamps, the IL 11, IL 21 and IL 35, were delisted or out of stock [9]. We could not read the site of Beurer's Hong Kong distributor, so ask there. Philips, long a familiar name for these lamps, has discontinued them in Hong Kong: its Hong Kong product data lists the InfraCare HP3621 and HP3643 as support-only, with production ended on 30 September 2018 [12].

Running cost in Hong Kong

A lamp's running cost is its power, times the time it is on, times the price of each unit (kWh) you use. For a typical household that uses about 275 kWh a month, each extra unit costs about 154.1 cents with CLP Power (with the October 2026 fuel charge) and 155.3 cents with HK Electric (with the November 2026 fuel charge), leaving out the temporary rebates that end on 31 October 2026 [13][14]. CLP Power supplies Kowloon, the New Territories and most outlying islands, HK Electric Hong Kong Island, Ap Lei Chau and Lamma [19]. Both companies change the fuel charge every month, and your own bill shows the rate you actually pay. At those prices, a 15-minute session costs:

Cost of one 15-minute session at autumn 2026 prices

CLP Power customers first, HK Electric customers second. The bar shows the power of the lamp.

  • Tailor Made TM200, 200 W7.7 cents (CLP), 7.8 cents (HK Electric)
  • BODYCARE IR-2014, 240 W9.2 cents (CLP), 9.3 cents (HK Electric)
  • TDP lamp CQ-29, 250 W9.6 cents (CLP), 9.7 cents (HK Electric)
  • Resty 275W10.6 cents (CLP), 10.7 cents (HK Electric)
  • Beurer IL 50 and Asante SN-52A, 300 W11.6 cents (CLP), 11.6 cents (HK Electric)
  • Resty 550W, both heads on21.2 cents (CLP), 21.4 cents (HK Electric)
Power × 0.25 hours × the price of each extra unit for a typical household: CLP Power 154.1 cents per kWh (October 2026 fuel charge), HK Electric 155.3 cents per kWh (November 2026 fuel charge), without the temporary rebates that end on 31 October 2026. Rounded to the nearest 0.1 cent. The figures assume the full rated power for the whole session.

An hour of use costs about 31 to 85 cents at those prices, depending on the lamp and the company. A TDP lamp also draws power while it warms up, 3 to 5 minutes in a US seller's manual for the CQ-27 and 15 minutes in the 2005 US filing for the CQ-27 and CQ-36 [21][8], on top of the session itself. For the same arithmetic on other appliances, see our guide to infrared lamps, heaters and heating pads.

Buying in Hong Kong: plug, warranty and service

Where each lamp is sold and who stands behind it
Lamp Sold in Hong Kong by Warranty as stated
Beurer IL 50 [3] YOHO; Hong Kong agent Top Leader 3 years (YOHO listing)
Asante SN-52A [5] Medimart 2 years
Tailor Made TM200 [20] YOHO (seller Family Club Plus) 1 year
BODYCARE IR-2014 [6] HKTVmall (seller Bodycare) 1 year
TDP lamp CQ-29 [7] STMS Supplies, Fanling Not stated
Resty 275W and 550W (our products) [2] resty.hk, by Reventis Limited; claims by email, no walk-in service point 1 year from delivery

Hong Kong homes run on 220 V at 50 Hz [19]. The Electrical and Mechanical Services Department says an appliance used here must be fitted with a three-pin plug that meets the safety requirements, warns that appliances bought outside Hong Kong may not suit the local voltage and frequency, and advises against buying or using an electric heater fitted with a two-pin plug [15][16]. So check the plug and the rated voltage, especially for a parallel import (水貨) or a lamp bought abroad, and ask who handles a warranty claim in Hong Kong: a local agent, the store or the maker overseas.

Five checks before you buy an infrared lamp

The details that differ most between the lamps in this guide.

  • Table or floor

    Decide where it will stand: a tabletop lamp needs a surface beside you, a floor lamp needs a corner beside your chair.

  • A timer that switches off

    Check that the lamp ends the session by itself, and in which steps you can set it.

  • Distance and time on the label

    The manual should give both. If it gives neither, ask before you buy.

  • Plug and voltage

    Hong Kong uses UK-style three-pin sockets and 220 V. Check both, especially for a lamp bought abroad.

  • Warranty in Hong Kong

    Note how long it runs, whether it covers the bulb or tube, and who handles a claim here.

Where the Resty lamps fit

The Resty lamps are floor-stand heat lamps for warmth on one area while you sit. The 275W single-head lamp warms one area at a time; the 550W double-head lamp has two heads on separate arms, each with its own timer and temperature setting, for one wider area or two areas next to each other. Both roll on four wheels, adjust between about 70 and 160 cm, come with a remote control and a UK-style plug, and carry a 1-year warranty from delivery. Delivery in Hong Kong is free and takes 2 to 4 working days.

If you would rather keep the lamp on a shelf and use it at a desk, a tabletop lamp suits you better. If you want long-wave infrared from a plate rather than a bulb, that is what a TDP lamp is built for. Compare both Resty lamps in our infrared heat lamp collection, read how to use an infrared lamp for distance and timer, and see how a heat lamp differs from a red light panel in near-infrared, far-infrared and red light.

Quick answers

Is a TDP lamp the same as an infrared heat lamp?

Not quite. Both give off infrared that you feel as warmth, but a TDP lamp warms a coated plate that gives off mostly long-wave infrared and barely glows, while a heat lamp uses a hot bulb or halogen tube that gives off mostly short-wave infrared and a visible glow.

Which infrared lamp uses the least electricity?

The one with the lowest power. Of the seven lamps in the tables, the 200 W Tailor Made TM200 uses the least per minute and the 550 W Resty lamp with both heads on the most; at autumn 2026 prices a 15-minute session costs between about 8 and 21 cents.

Tabletop or floor-standing?

A tabletop lamp is easier to store and suits a desk or side table. A floor-standing lamp needs no table, stands beside a chair or sofa and reaches you on an adjustable arm.

How far should I sit from an infrared lamp?

As far as its manual says. Of the lamps here, the Tailor Made TM200 listing gives about 30 cm, the Asante at least 40 cm and the Resty manual about 40 cm; Beurer's current IL 50 manual gives no figure, only a distance where the warmth feels pleasant, and the CQ-29 seller gives none. Move further away whenever the warmth turns into heat.

Can I still buy a Philips infrared lamp in Hong Kong?

Not new from Philips Hong Kong: it lists its InfraCare lamps as support-only, with production ended in September 2018. Any you find are old stock or second-hand.

Why does an infrared heat lamp glow red?

A heat bulb also gives off some visible light, and a red front lets through the infrared while holding back much of the bright white light, so you see a red glow. Most of the warmth comes from infrared that you cannot see.

Sources

  1. Consumer Council, CHOICE magazine issue 556, February 2023, 家用紅外線燈 (home infrared lamps): study results and model comparison table, consumer.org.hk and table (PDF), checked on 28 October 2026.
  2. Resty, product pages of the 275W single-head lamp and the 550W double-head lamp on resty.hk, including what they quote from the manual, checked on 28 October 2026.
  3. Beurer, IL 50 infrared heat lamp, product page beurer.com and instructions for use (PDF); Hong Kong listing YOHO, checked on 28 October 2026.
  4. Beurer, IL 35 infrared lamp, product page beurer.com, checked on 28 October 2026.
  5. Asante SN-52A, product listing at Medimart medimart.com.hk, checked on 28 October 2026.
  6. BODYCARE IR-2014, product listing at HKTVmall hktvmall.com, checked on 28 October 2026; details as recorded in source 1.
  7. TDP lamp CQ-29, product listing at STMS Supplies (the seller does not name the brand), stmssupplies.com; CQ range and stated wavelengths on the site of a maker whose CQ model numbers match, xf-tdp.com, checked on 28 October 2026.
  8. US Food and Drug Administration, 510(k) summary K043558 for TDP lamps CQ-27 and CQ-36 (2005), accessdata.fda.gov (PDF), checked on 28 October 2026.
  9. Beurer infrared lamp range, beurer.com; YOHO listings of the IL 11 (parallel import, delisted) yohohongkong.com, the IL 21 (out of stock) yohohongkong.com and the IL 35 (delisted) yohohongkong.com, and the HKTVmall listing of the IL 35 (offline) hktvmall.com, checked on 28 October 2026.
  10. National Institute of Standards and Technology, CODATA value of the Wien wavelength displacement law constant, physics.nist.gov, checked on 28 October 2026.
  11. Lamptech, Museum of Electric Lamp Technology, Philips Infrared Ruby Industrial Reflector 250W R125, spec sheet page (secondary source), lamptech.co.uk, checked on 28 October 2026.
  12. Philips, Hong Kong product data for the InfraCare HP3621 philips.com and HP3643 philips.com, checked on 28 October 2026.
  13. CLP Power, Electricity Tariff, residential, for consumption on and after 1 January 2026, clp.com.hk (PDF), and Fuel Cost Adjustment (October 2026: 46.2 cents per kWh), clp.com.hk, checked on 28 October 2026.
  14. HK Electric, Residential Tariff for consumption in 2026, with the monthly Fuel Clause Charge (November 2026: 55.1 cents per kWh), hkelectric.com; the typical household of 275 kWh a month as in the Government press release on the 2026 tariffs, 18 November 2025, info.gov.hk, checked on 28 October 2026.
  15. Electrical and Mechanical Services Department, Household Electrical Safety Handbook, 2.1 Safety Tips for Buying and Using Electrical Appliances, emsd.gov.hk, checked on 28 October 2026.
  16. Electrical and Mechanical Services Department, Safety Tips for Using Household Electrical Appliances (winter), emsd.gov.hk (PDF), and Sub-divided Unit Electrical Safety, emsd.gov.hk, checked on 28 October 2026.
  17. CIE, International Lighting Vocabulary, entry 17-21-004, infrared radiation (IR-A 780 nm to 1,400 nm, IR-B 1.4 to 3.0 µm, IR-C 3 µm to 1 mm), cie.co.at, checked on 28 October 2026.
  18. ICNIRP, statement on far infrared radiation exposure, Health Physics 91 (2006) 630-645, icnirp.org (PDF), doi:10.1097/01.HP.0000240533.50224.65, checked on 28 October 2026.
  19. GovHK, Hong Kong: The Facts, Power and Gas Supplies (May 2016), gov.hk (PDF), checked on 28 October 2026.
  20. Tailor Made TM200, product listing at YOHO (seller Family Club Plus), yohohongkong.com, checked on 28 October 2026; lamp type, tilt and timer as recorded in source 1.
  21. Lhasa OMS, TDP CQ-27 IR-Heater Lamp, instruction manual, lhasaoms.com (PDF), checked on 28 October 2026.

Use and safety

  • Read the manual of your own lamp before the first session and keep to its distance and session time; for the Resty lamps that means about 40 cm and 10 to 15 minutes to start.
  • Stay awake while any infrared lamp is on, set its timer if it has one, and never fall asleep under it.
  • Do not look straight into the bulb, tube or plate, and keep the head away from the face.
  • Keep curtains, cushions, bedding and anything else that can burn well away from the hot head, and keep children and pets away unless an adult is watching.
  • Do not touch the bulb, the shade or the guard while the lamp is on or still warm, and let it cool fully before you move or store it.
  • Stop if the warmth turns uncomfortable, and do not use a lamp on irritated or broken skin. If you are sensitive to heat, have reduced feeling in your skin or are pregnant, ask a healthcare professional before use.
More articles: Red Light Panel & Infrared Lamp Guides

Read more

How to Use an Infrared Lamp at Home: Distance, Time and Timer

Putting the lamp together, where it goes in a Hong Kong flat, how far away to sit, how long to start with and what to do after each use.

Read more How to Use an Infrared Lamp at Home: Distance, Time and Timer

Infrared Lamp, Heater or Heating Pad: What Is the Difference?

How a fan heater, a heating pad or electric blanket and an infrared lamp warm you, with the space, power and running cost of each in a Hong Kong flat.

Read more Infrared Lamp, Heater or Heating Pad: What Is the Difference?

Resty products are for everyday wellbeing. Store information is not medical advice. Product information

Chat on WhatsApp (opens WhatsApp in a new tab)